One coil. Endless industrial possibilities — grades 1006 to spring steel, Ø 5.5–18 mm, 1–2 MT coils
Steel wire rod is the essential starting material for hundreds of industrial and manufacturing applications. Its controlled chemistry, excellent drawability and consistent mechanical properties make it the preferred choice for industries that demand reliability, performance and processability
Reyhani supplies premium-quality wire rod sourced from leading international mills, available in multiple grades and coil weights to meet diverse industrial requirements across global markets
| Grade | C % | Mn % | Si % | P % (max) | S % (max) | Al % (min) |
|---|---|---|---|---|---|---|
| 1006 | 0.05 – 0.08 | 0.25 – 0.45 | 0.15 – 0.30 | 0.030 | 0.030 | 0.020 |
| 1008 | 0.06 – 0.10 | 0.30 – 0.50 | 0.10 – 0.30 | 0.030 | 0.030 | 0.020 |
| 1010 | 0.08 – 0.13 | 0.30 – 0.60 | 0.10 – 0.30 | 0.030 | 0.030 | 0.020 |
| 1012 | 0.10 – 0.15 | 0.30 – 0.60 | 0.10 – 0.30 | 0.030 | 0.030 | 0.020 |
| 1018 | 0.15 – 0.22 | 0.60 – 0.90 | 0.10 – 0.30 | 0.030 | 0.030 | 0.020 |
| 1022 | 0.18 – 0.25 | 0.70 – 1.00 | 0.10 – 0.30 | 0.030 | 0.030 | 0.020 |
| 10B21 (SAE) | 0.18 – 0.23 | 0.70 – 1.00 | 0.10 – 0.30 | 0.025 | 0.025 | 0.020 |
| 10B38 (SAE) | 0.34 – 0.41 | 0.70 – 1.00 | 0.10 – 0.30 | 0.025 | 0.025 | 0.020 |
| SAE 1008M | 0.06 – 0.10 | 0.30 – 0.60 | 0.15 – 0.35 | 0.030 | 0.030 | 0.020 |
| SAE 1010M | 0.08 – 0.13 | 0.30 – 0.60 | 0.15 – 0.35 | 0.030 | 0.030 | 0.020 |
Chemical composition may vary slightly between mills and product condition
| Grade | Tensile Min (MPa) | Tensile Max (MPa) | Yield Min (MPa) | Elongation Min (%) |
|---|---|---|---|---|
| 1006 | 350 | 520 | 220 | 35 |
| 1008 | 350 | 550 | 230 | 33 |
| 1010 | 370 | 600 | 240 | 30 |
| 1012 | 400 | 650 | 260 | 25 |
| 1018 | 450 | 700 | 300 | 20 |
| 1022 | 500 | 750 | 330 | 18 |
| 10B21 (SAE) | 600 | 850 | 350 | 16 |
| 10B38 (SAE) | 700 | 900 | 450 | 12 |
| 3SP | 1100 | 1400 | 900 | 8 |
| SG2 | 400 | 600 | ≥ 320 | ≥ 22 |
| S2 (Spring Steel) | 1700 | 2000 | ≥ 1500 | ≥ 5 |
Mechanical properties are typical values for as-rolled condition
| End Product | Recommended Grades | Key Properties Required | Final Performance / After Processing |
|---|---|---|---|
| Binding Wire / Rebar Tie Wire | 1006, 1008, 1010, RST34 | High ductility, soft, easy twisting | Softness, excellent bendability, no cracking during twisting |
| Galvanized Wire | 1006, 1008, RST34 | Excellent drawability, clean surface | Good coating adhesion, uniform zinc layer, corrosion resistance |
| Copper Coated Wire | 1006, 1008, 1010 | Clean surface, good drawing | Strong copper bonding, smooth surface, good conductivity |
| Wire Mesh | 1006, 1008, 1010 | Good drawing, uniform diameter | Dimensional accuracy, good welding performance |
| Nails | 1010, 1018 | Good cold heading, ductility | No cracking, high holding strength |
| Staple Wire | 1006, 1008, 1010 | Excellent drawing, bendability | No fracture during bending, copper coating capability |
| Screws | 1022, 10B21 | High strength, cold heading | High dimensional accuracy, surface integrity |
| Bolts & Nuts | 10B21, 1018, 1022 | High strength, good machinability | High tensile strength, reliable threading |
| Welding Wire (MIG/CO2) | SG2 | Good weldability, stable composition | Smooth feeding, strong weld, low spatter |
| Spring Wire | S2 (Spring Steel), 3SP | High tensile, elastic recovery | High elasticity, fatigue resistance, no cracking during coiling |
| Chain Link Fence | 1008, RST34 | Good drawing, coating adhesion | Uniform coating, corrosion resistance |
| PVC Coated Wire | 1008, RST34 | Surface cleanliness, flexibility | Strong PVC adhesion, no peeling, long life |
Recommended grades are based on common applications. Final grade selection should be confirmed with mill certificates
Tell us the product, grade, quantity and destination — our sales team will come back to you with a tailored offer